Mater then proceeds to tell a far-fetched story of something he supposedly did in the past to Lightning McQueen, to which the action shifts to Mater’s story. At a midway point, the action briefly shifts back to Mater and McQueen in which Mater proclaims that McQueen was also involved, telling him, “Don’t you remember? You was there, too!” (or also some other variation thereof). The flashback then resumes with McQueen’s sudden (and usually unwilling) participation. Once Mater finishes his tall tale, (with the exception of Tokyo Mater) McQueen insinuates or argues to him that Mater’s story wasn’t true at all. Mater then says, “Well, suit yourself!”. (or also some variation thereof). Then, coincidentally, one or more characters or elements involved in the story appear, paradoxically suggesting the story might have been authentic. McQueen then breaks the fourth wall by looking at the camera with shock, (or also other variation thereof) for he believed that Mater’s tall tale was real.
Will the color look harsh on me? If you choose a hair color that is natural looking, it will not look harsh on you. For example: If you are young, and want to enhance your own hair color. Your stylist will choose a color very similar to what you already have. Younger people can get away with more drastic changes in their hair color because they generally have vibrant skin tones. Although, if a young person chooses a black color for instance, and their hair color is not naturally black, this can sometimes be very harsh looking on them also. Like wise, when young people with very dark hair, try to go all over blonde, it can be a too harsh for the same reasons. Semi-gloss paints are very similar to gloss plaints except it has lesser sheen. Semi-gloss is also suitable for rooms with high humidity (best used for children's room) and can be used for trim works and casings. These paints ensure maximum durability. Materials and their application, every paint manufacturers paint will vary. If you are freshening up old walls and painting back to the existing color, the product doesn't have to be high end or have good coverage. If you need to paint a dark color over light color or light color over dark, you may want to consider purchasing a top quality paint to avoid multiple coats. I suggest Valspar, Pittsburgh or Benjamin Moore top of the line wall paint. These brands work well for straight out of the bucket use and are application friendly. Sherwin Williams is not my first choice because the coverage is poor and you will have to apply multiple coats but, it does apply, fluently. If you find a product does not apply well, maybe it is to heavy and/or sagging on the wall, you may need to thin the paint with a little water, this will reduce the coverage but make the paint flow better and lay down nicer on the surface. I do recommend latex paints for all applications, these days a good high end latex is as good as oil paint and your tools clean up much easier, it will also be less harsh on the respiratory system. The only situation I recommend oil paint, is as a primer/stain blocker over stains that "bleed" through the paint. You can get a stain blocking oil primer in a convenient spray can and spot prime any trouble areas before painting and in the case you need to prime all of the wall due to smoke or water damage, I recommend getting it in gallons and rolling it on where the stains are present. Don't forget proper ventilation and/or a respirator when using the oil based primers!
When you have all the tools at hand, examine your exterior. You might find exterior painting problems, which could be any of the following: alligatoring, blistering, chalking, chalk run down, crackling, dirt pickup, efflorescence, fading, frosting, lapping, mildew, nail head rusting, paint incompatibility, peeling, poor alkali resistance, poor adhesion, poor gloss retention, surfacent leaching, staining, vinyl siding wrap, wax bleed, or wrinkling. Now that you have primed the airless, make sure that there isn't a tip in the gun of the airless and bring it over to the empty bucket. Since there is typically cleaning solution in the hose leading to the gun it is a good idea to spray that out until you see thick paint coming out. Once you have thick paint coming out you may put your tip back in. Remember that the tip will have an arrow on one side of the handle that shows which direction it must be in, in order to spray. PRIMARY COLORS. The primary colors are red, yellow and blue. These colors are your base colors from which all other colors come from. Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels.