Masonry Walls and Ceilings. Interior masonry walls and ceilings above grade may, in general, be painted in much the same manner as plaster surfaces. Here again, it is necessary to allow adequate time for the masonry to dry before applying paint and, in addition, attention should be given to the preparation of the surface. When decorating a wall containing Portland cement (concrete, for example), it is essential to take precautions against the attack of alkali. For this purpose, alkali-resistant primers such as rubber-base paints may be used when oil paints are to follow.
When it comes to rolling out the walls never ever use a cheap foam roller. Foam rollers never evenly absorb the paint out of the pan and will actually add time to you project and cause more mess. Buy yourself a synthetic professional 3/8 nap roller head for about $6 to $8. Not only will the paint be applied in a smoother fashion you will experience less work and mess.
When you are including the finishing touches on a area with accessories, make sure that you remember this one important thing.. It is important to know which color is dominant. Do you desire for things to stay that way? Now highlight the main color with your accessories. Using accessories like paintings, throw pillows and baskets in bolder colors can help detract attention from other parts of the room.
Selecting a Shop. You should always get quotes from at least 2-3 different shops near you. This will give you a chance to not only compare prices, but to also check out the quality of work each shop has done. Ask to see cars they've just painted. Look for orange peel or excessive overspray. Do they mostly do insurance work or do they paint entire cars also? What types of cars are they working on? A shop that sprays nothing but old beaters probably doesn't inspire as much confidence as one that does insurance work for the local Lexus or Mercedes dealer.
Even if you don't need to apply a coat of primer before your new coats of paint, doing so will always save you money. Whether you use white or tinted primer, a coat of primer is always more cost effective for one simple reason: It is cheaper! In fact, primer may cost as little as half as much as standard paint. If you get it tinted the same as your paint, then it is cheaper by the coat. If you use white, as in the first scenario above, it will also minimize the number of coats of paint you have to apply. Either way it reduces how much paint you have to buy. Do you want to learn more about maximizing your paint color coverage, minimizing your paint usage, optimizing coats, and perfecting your primer?
Our next step is mixing the oil paint. DO NOT SKIP THIS STEP. Obviously you will need to buy some paint thinner, but the most important product you will need is Penetrol $12. Take a plastic quart cup that you will be painting out of and fill it up about three quarters with paint. Now mix in a couple of tablespoons of Penetrol and the slightest amount of thinner. Mix it up with a stick real good and you are ready to go. Why Penetrol? This product is the key to a fantastic looking job. Penetrol will not only smooth out the finish it will extend the time (usually about 20 minutes) before the paint starts to get sticky. This will allow you to apply a glass like finish and eliminate brush marks. We are going to apply two coats here as well so don't glob on the paint. When you are painting the door frames get used to the paint and watch your drips. After about ten minutes or so you will get used to how the paint flows and how damn good your finish looks. Allow to dry overnight before apply second coat. Tip: after you apply the second coat remove the tape and don't allow to dry first. You will get a little paint on your hands from the tape, but deal with it. By removing the tape now you will ensure crisp lines. In some case when you allow the second coat to dry you will pull a bit of the oil paint off. It is not common, but in my opinion why take the chance.
Now is the time to paint the exterior of your home. It is best to start painting on the sunny side of your home first and the reason for that is because it's likely there is still dew on the shaded side of your home in the morning. Tip: Your house must be perfectly dry in order to start painting.