Stripping all the chrome. One of the single most important steps in saving money on a paint job is to strip your Mustang as much as possible yourself. This means taking off anything and everything that won't be painted. The more you take off the less the painter has to mask around. Masking not only takes their time (which costs you money) but it also results in areas that simply can't get a full coat of paint. If you take everything off, then the painters can simply scuff and spray, which will give you better and more consistent coverage. Rubber-base paints, which dry to a hard semi-gloss finish, may be used on concrete floors below grade, providing the floor is not continually damp from seepage and condensation. Remove side view mirrors (unless they're to be body color) as well as exterior door handles and locks. This will take some extra time because you need to remove the interior door panels to get these off, but it's worth it. Head lights, tail lights, marker lights and license plates should come off too, but you'll need them in place to drive to the paint shop. So bring some tools so you can quickly take these off once you arrive. Depending on the year Mustang you can just take off the chrome bezels or rings. The shop can then easily mask the headlight or tail light itself and still get plenty of paint around the edges.
If you are going to paint your home and have decided to do it yourself take a little extra time and spend a bit more money to do it right. Colors are subjective, but the quality of materials and painting tools are not. For this example we are going to go through the process of painting the interior of a typical home. In just about every paint job I did I insisted that customers used an oil based paint on woodwork and doors. Not only does oil paint make wood look and feel better it gives you a superior durable and washable finish that water based latex paint can't. There is nothing worse than seeing a newly painted door or frame ruined by fingerprints and other marks. Now that you have primed the airless, make sure that there isn't a tip in the gun of the airless and bring it over to the empty bucket. Since there is typically cleaning solution in the hose leading to the gun it is a good idea to spray that out until you see thick paint coming out. Once you have thick paint coming out you may put your tip back in. Remember that the tip will have an arrow on one side of the handle that shows which direction it must be in, in order to spray. So lets start with Warm and Cool. When thinking about Warm, think about a desert panorama of gold, brown and earth tones. When thinking about Cool think of colors in the artic such as gray, black, white or think of the deep blue sea such as deep blues, blue greens and turquoise. Everyone can wear just about any color, the difference is in the shade of the color. When thinking of clothing, makeup or accessories, visualize Cool as a color with a drop of silvery-blue. Visualize Warm as a color with a drop of gold. For example, if you put a drop of gold to a red sweater it becomes a Warm red, but if you put a drop of silvery blue it becomes a Cool red. For stippling you need a special brush; get one that is flat, and has short, stiff bristles.