Anti-condensation paints are used for rooms with humid conditions such as kitchen and bathrooms. This paint is usually formulated to prevent condensation and often includes fungicide.
First consider the size of the painting. The more impressive the subject, the higher the emotions it appeals to, the bigger it is. Religious, mythological paintings are often huge - their massive energy makes you shiver. It is pretty understandable with figurative paintings like Rafael's "The Sistine Madonna", and more subtle with color field paintings of Mark Rothko. People are often overwhelmed with religious tremor in the presence of his artwork, and the size factors in. Also, the subject often calls for larger canvases - battle scenes need space and cannot be fitted into a smaller painting, while some subjects will get lost unless depicted in a smaller size.
You can tell when the bucket of paint is getting low when the airless starts pumping really loud and doesn't stop. Simply tip the nearly empty bucket of paint, at an angle so that the mesh filter is covered and wait for the airless to catch up and stop pumping. Sometimes it's just easier to just to replace the bucket of paint with the new one and when that starts going down, pour the excess from the old bucket into the new one.
Gloss - These paints have a high sheen level and are usually used on woodwork.
Use Plain White Primer for Light Paint Colors. In our first case, if you decide to paint a wall in your house with a light yellow color, but the wall is currently a deep dark brown, you will go through bucket after bucket of paint trying to cover that brown, easily doing 4 - 6 coats or more. But if you put down a coat of white primer first, you could be done after 2 coats of paint.
Cutting Down on Paint Chemicals. Everyone knows the nasty smell of paint drying - worse with oil-based paints, but also noticeable with vinyl emulsions. This is caused by paint solvents containing VOCs. They are proven health risks, and can cause allergies, headaches and breathing problems and irritate eyes, nose and throat. They are also an environmental hazard.
The casein, which serves as the glue binder, should be soaked in 2 gallons of hot water until thoroughly softened, which should be approximately 2 hours. After dissolving the trisodium phosphate in 1 gallon of water it should be added to the casein, stirring the mixture until the casein dissolves. This solution should be mixed with the lime paste and 3 gallons of water.