Fire-retardant paints do not resist fires completely but its fire-resistance formulation prevents it from fire in spreading fast.
Either edge of trim is painted with body color, and is where caulking is applied at most 90 degree angles. Painting trim only, cannot feasibly include caulking, as this fails and opens up over time. Most homes need new caulking when painting the exterior, and a close inspection can determine.
When choosing colours for exterior surfaces, consider the style of the brickwork or masonry of your home along with the colours used on nearby buildings, so as to pick colours that are sympathetic to these surroundings. Colours for fences and sheds should be selected with the same criteria in mind.
Set up costs are normally included with any home improvement job, painting separate times for complete exterior painting can essentially cost double, unless agreed before work begins in painting quote.
Are the contours rough or concealed?
Always use a sanding block for flat surfaces. Just your hand behind a thin piece of sand paper can leave grooves and low spots. It's also easier on your hands. For inside curves try wrapping the sand paper around a short section of garden or heater hose. This will help approximate the concave curve and help stay away from sanding through hard edges. On hard edges, like the top ridge of a fender or leading edge of a hood, you need to do this by hand. A sanding block will quickly dig right through the paint on a hard edge and take you down to bare metal. This means primer and more sanding.
Masonry paints come in a wide variety of finishes, from textured to ultra-smooth. Opt for a texture if you need to disguise fine surface cracks. If you favour traditional finishes, then consider limewash, which is available from specialists such as Francesca's Lime Wash. The beauty of this paint is that it will mellow and weather with time. However, do check with the supplier first to ensure that the surface is suitable for this finish.