If you have a vinyl top then remove the molding separating the vinyl and paint. Drip rail chrome really should be removed also, but can be extremely hard to take off undamaged. If you plan on buying all new drip molding then definitely remove the old for painting. But if you want to keep the originals then it might be better to leave them on and let the painter mask around. If you have hub caps it's easy to just take them off. While the paint shop should completely mask all four tires, overspray can still find its way in. It's sometimes better to play it safe and just remove wheel covers. By licensing these names, paint companies and retailers are taking advantage of the popularity of these well-known brands to attract you to these paints; that way they don't have to use obnoxious colors to bring your attention to their color wheel. If you look at the colors in these displays you will notice that they are generally missing those bright, saturated tones. Instead, most of the colors are more neutralized. Naturally, these colors are much more attractive to paint on a wall in your home. How warm does it have to be in order to paint your home? For most paints it typically has to be 37 degrees or warmer in order to paint the exterior of your house. Now if you are painting two coats of paint on your house and it is 55 degrees or cooler for the day, it is a good idea to paint the first coat one day and apply the second coat the day after. If you live in a really dry climate, like Denver, and your painting in the summer months, you can defiantly apply two coats in one day. However, the more humid climates in the south, it is still recommended to paint only one coat per day.
Once you figure out which position is prime and which position is spray, place the valve in the prime position and grab the primer hose. Point the primer hose in the empty bucket near the top and at an aproxx.45 degree angle from the side (the reason for this is that there is likely to be pressure still built up in the airless and when you first switch on the airless to prime it, paint will likely burst out of the primer hose and you don't want to have it go everywhere). Now turn the airless paint sprayer on and you will see that the airless is sucking up the new paint and pumping out the primer hose. At first you will typically see a cleaning solution come out followed by your paint. When you see your paint coming out switch over the primer valve to the other position and you will see the airless pumping paint into the main hose. The stencil must be held very firmly against the surface with one hand, and the stencil brush worked over it quickly with the other hand. Or, if you have an assistant, it is best for one person to keep the stencil steady, while the other does the painting. In removing the stencil, make sure you pick it up without smudging. Purchase paint pan liners 5 for about $5. Once your done simply throw the liner out saving your paint pan and also giving you the opportunity to change paint colors without having to clean and dry the pan. Reasons to Use Primer with Paint. Primer plays 2 important roles in painting projects. Firstly, if you are painting a wall that has never been painted (with water-based paint) before, primer will allow your new paint to stick (or "mechanically bond") to the surface. Since primer is typically not necessary if the wall has previously been painted, many people skip this step. Unfortunately, doing so negates its 2nd (often, more valuable) role in color coverage.