Rubber-base paints, which dry to a hard semi-gloss finish, may be used on concrete floors below grade, providing the floor is not continually damp from seepage and condensation.
Solvent or oil-based paints are used where a tough, durable finish is required for interior and exterior timber, masonry and furniture - although, as mentioned above, the new generation of acrylics and multi-surface paints offers viable alternatives. In general, brushes need to be cleaned with turpentine or white spirit.
Cold water paints of the casein type may be applied either directly to a plastered surface, or the surface may be first given a coat of primer-sealer to equalize uneven suction effects. The same is true of resin-emulsion paints, with the recommendations of the manufacturer of the product being given preference in case of doubt. Since resin-emulsion paints usually contain some oil in the binder, they should ordinarily be applied only to plaster which has dried thoroughly.
By licensing these names, paint companies and retailers are taking advantage of the popularity of these well-known brands to attract you to these paints; that way they don't have to use obnoxious colors to bring your attention to their color wheel. If you look at the colors in these displays you will notice that they are generally missing those bright, saturated tones. Instead, most of the colors are more neutralized. Naturally, these colors are much more attractive to paint on a wall in your home.
If you are going to paint your home and have decided to do it yourself take a little extra time and spend a bit more money to do it right. Colors are subjective, but the quality of materials and painting tools are not. For this example we are going to go through the process of painting the interior of a typical home. In just about every paint job I did I insisted that customers used an oil based paint on woodwork and doors. Not only does oil paint make wood look and feel better it gives you a superior durable and washable finish that water based latex paint can't. There is nothing worse than seeing a newly painted door or frame ruined by fingerprints and other marks.
Cement-water paints are best suited for application to basement walls which are damp as a result of leakage or condensation. To apply these paints, the same procedure should be followed as is described here for painting exterior masonry walls.
How to Paint your Mustang or other Classic Car on a budget