The reasoning here is simple. Every color in the visible spectrum can be assigned a number based on a luminosity scale (a scale from light to dark) from 0 to 9 where white is 0 and black is 9. Now suppose that the brown you are trying to cover has a score of 8, and the yellow paint you want to apply has a 4.
Anti-condensation paints are used for rooms with humid conditions such as kitchen and bathrooms. This paint is usually formulated to prevent condensation and often includes fungicide.
Remember, you will need to clean the airless in that same fashion before you return the airless back to the rental company.
The area covered by a gallon of whitewash depends upon the nature of the surface, but ordinarily a gallon will cover about 225 sq. ft. on wood, about 180 sq. ft. on brick, and about 270 sq. ft. on plaster. The formulas mentioned will make from 10 to 14 gallons of whitewash. If a smaller quantity is desired, the amount of each ingredient should be reduced proportionately.
At a minimum you want to remove all the chrome from the car. Take off both front and rear bumpers. If your Mustang has bumperettes that are body color be sure to bring them along so they can get sprayed at the same time as the rest of the car. Remove all rocker, hood and trunk molding. Same for wheel well molding and all emblems. This would be a good time to order some new emblems and attachment hardware. Also spend some time cleaning up all the chrome with #0000 steel wool. Nothing looks worse on a fresh paint job then faded emblems and corroded, cloudy chrome.
Special paints have been innovated from different consumer insights and brilliant paint technology that allows specific paints for specific needs.
A flat, semi-gloss, or high-gloss finish may be applied to the primed surface. For a flat finish, two coats of flat wall paint should follow the priming coat. For a semi-gloss finish, one coat of flat wall paint and one coat of semi-gloss paint should be applied to the primed surface. For a high-gloss finish, one coat of semi-gloss paint and one coat of high-gloss enamel should be used over the priming coat.