Primer paints may be oil- or water-based and are used to seal unpainted surfaces to prevent covering coats of paint soaking in. The appropriate type of primer should be used for the surface being painted - wood, metal, plaster or tiles. There are some 'all purpose primers' available which are designed for two or more of these surfaces.
If you have a vinyl top then remove the molding separating the vinyl and paint. Drip rail chrome really should be removed also, but can be extremely hard to take off undamaged. If you plan on buying all new drip molding then definitely remove the old for painting. But if you want to keep the originals then it might be better to leave them on and let the painter mask around. If you have hub caps it's easy to just take them off. While the paint shop should completely mask all four tires, overspray can still find its way in. It's sometimes better to play it safe and just remove wheel covers.
Hiding power comes from the paint's pigment and is affected by the manner and thickness of the application. Color retention is the ability to maintain its original color during exposure to sunlight, etc. Chalking resistance prevents the white chalky powder from forming on the surface and lightening the color of the paint. Chalking occur over a period of time. Blister resistance keeps excessive moisture from coming through the substrate and affecting the paint layer. Tip: if paint is applied over a damp or wet surface, blistering is imminent.
Preparation, the key to a successful paint job is to take the correct steps when preparing the job. Preparation for this article, has two parts, the first part is wall prep. The walls you are going to paint may have nail holes or imperfections that need to be filled before you paint. The proper way to fill them, if they are smaller is with water putty, by simply forcing a little bit of the putty in the hole and breaking it off flush with the surface. For larger depressions, use a drywall compound or spackle, which may require a second application to fully fill the indentation and make the repair/"patch" flush with the wall.
Akbar (1556-1605) was the one who started encouraging of Mughal artist. After he had consolidated his political power, he built a new capital at Fatehpur Sikri where he collected artists from India and Persia. More than a hundred painters were employed, most of whom were Hindus from Gujarat, Gwalior and Kashmir. They worked under the two Persian master-artists Abdus Samad and Mir Sayyid Ali, but they were encouraged and inspired by Akbar.
Following a European directive, the British paint industry has reduced VOCs in two stages, the second of which came into force in January last year.
Cement-water paints are best suited for application to basement walls which are damp as a result of leakage or condensation. To apply these paints, the same procedure should be followed as is described here for painting exterior masonry walls.