Cars 2 is a 2011 American 3D computer-animated spy action-adventure comedy film produced by Pixar Animation Studios for Walt Disney Pictures. It is the sequel to 2006’s Cars and the second film in the Cars franchise. In the film, race car Lightning McQueen and tow truck Mater head to Japan and Europe to compete in the World Grand Prix, but Mater accidentally becomes sidetracked with international espionage. In the film’s ensemble voice cast, Owen Wilson, Larry the Cable Guy, Tony Shalhoub, Guido Quaroni, Bonnie Hunt, and John Ratzenberger reprise their roles from the first film. Paul Newman, who voiced Doc Hudson in the previous film, died in September 2008, so his character was written out of the film, while George Carlin, who previously voiced Fillmore, died during the same year, so his role was passed to Lloyd Sherr. The returning cast is joined by Michael Caine, Emily Mortimer, John Turturro, Eddie Izzard, and Thomas Kretschmann, who voice the new characters introduced in this film. It was directed by John Lasseter, written by Ben Queen, and produced by Denise Ream. This was also the final film directed by Lasseter prior to his exit from Disney in 2018.
THE BRUSHWORK. Depending on the art movement and personal peculiarities of the artist, the brushwork can range from delicate and almost invisible to rough and plastic. If you are grappling with the problem of choosing a woodwork colour to go with neutral walls, check out Architectural Colours by David Oliver, the founder of Paint & Paper Library. He arranged his off-whites for ceilings, cornices, walls and woodwork in chromatical groups and the concept has been so well received that chromatically arranged colours, such as soft greys, greens and pinks, have been introduced. The salt and alum should be dis-solved in 4 gallons of hot water, after which the molasses may be added to the mixture. The resulting clear solution is then added to the lime paste, stirred vigorously, and thinned with water to the desired consistency. This whitewash has a yellow tinge when first applied, but the color disappears in a few days leaving a white film.
If paints have been allowed to stand and hard lumps or skin have formed, the skin or scum should be removed, after which the paint can be stirred and strained through screen wire or through one or two thicknesses of cheesecloth. Proper brush technique: When "cutting in" with a paint brush you should dip the brush in paint and tap the sides of the bucket on each side of the brush, leaving a good amount on the brush so you are able to minimize the times you will need to dip/load the brush. Next, take the brush and make a one foot to two foot line down the wall about an inch or two away from the trim or surface you are going to paint up next to, this is much like taking a knife full of butter and spreading it across an entire slice of bread. After, spreading the paint over the section, go back and even the paint out evenly across the section and cut up next to the trim with the brush. You want to paint up next to the trim or surfaced to be cut-in with the paint brush after you have released most of the paint on the wall, it is easier to cut in with the tips of the brush exposed and not loaded with a lot of paint. Painting ceiling does not require premium paint. You can use flat $15 to $20 ceiling paint. I use Sherwin Williams PRO-MAR 200. Painting ceiling requires a lot of physical work and plenty of drop cloths. If you are not up for the challenge or have very high ceilings contacted a professional will prove to be a smart move. For localities where such conditions exist, self-cleaning paints should be selected. These paints are usually so designated on the label. Concrete, plaster, and metal surfaces each present special problems in painting. For instance, paint for use on masonry or new plaster must be resistant to dampness and alkalies, and paints used on steel must have rust-inhibitive properties.