Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel. Rubber-base paints, which dry to a hard semi-gloss finish, may be used on concrete floors below grade, providing the floor is not continually damp from seepage and condensation. Eco Paint Specialist's or it's affiliates do not take any responsibility of any outcomes of this article. Denver's House Painting Authority, Cal Phillips & Eco Paint Specialist's Inc.
You'll need a large compressor, not just the typical 20 gallon variety most of us have. This is a 60 gallon, vertical compressor with typically a 5+ hp motor. Then you'll need a decent paint gun (possibly 2; one for primer and one for color) which again is an expense. Then there's the question of where you'll paint the car. Renting a paint booth is best, but can be expensive and hard to find. You can always seal up your garage or shoot out in the wetted down driveway, but you'll inevitably get dirt and moisture into the paint. The reasoning here is simple. Every color in the visible spectrum can be assigned a number based on a luminosity scale (a scale from light to dark) from 0 to 9 where white is 0 and black is 9. Now suppose that the brown you are trying to cover has a score of 8, and the yellow paint you want to apply has a 4. Plaster. New dry plaster in good condition, which is to be finished with a paint other than water paint, should be given a coat of primer-sealer and allowed to dry thoroughly before being inspected for uniformity of appearance. Variations in gloss and color differences in the case of tinted primers indicate whether or not the whole surface has been completely sealed. If not, a second coat of primer-sealer should be applied. If only a few "suction spots" are apparent, a second coat over these areas may be sufficient. Now, decide WHAT you want to paint. Very important...you do NOT need to know how to draw. That's the great thing about painting, you can create even if you've never had a lesson. Don't get me wrong, art school is great. But don't let the lack thereof deter you from creating. You do not have to have a teacher to tell you how to create. You do need to know a few basic techniques, but from there let your imagination fly! When deciding what to paint, go to some websites about artists or Google famous artists to get inspired. Again, do not let a lack of training deter you from painting! Many of the great artists of the past had no training either. Many can't draw stick figures, but they can paint because the colors give you amazing options of expression! You may also go to my websites mentioned below or Google me to see all the crazy work I've created. My personal preference has been to create a large variety of work to keep it interesting and versatile. I did not want to be that artist who only painted one thing over and over. To me that's boring, and it should be boring to you too. Any known artist of the past has a vast variety of work. You'll also find that it makes it more interesting to you while you're doing it, because you won't ever get bored, you'll always be wondering how it'll turn out.