Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
The paints may be applied by brush or spray; the small spray attachment for vacuum cleaners is very convenient, especially for painting radiators.
THE BRUSHWORK. Depending on the art movement and personal peculiarities of the artist, the brushwork can range from delicate and almost invisible to rough and plastic.
Alkyd is an old interior paint made newly popular by a change in solvent - a super-refined petroleum chemical that has almost no odor. It is not a water paint. You thin it and clean brushes with mineral spirits or turpentine, or, if you want to retain the odorless feature, with the new odorless solvent. (Ask the paint-store man for just that, odorless solvent).
If red is the color of fire and yellow is the color of sun, then orange color, which originates from the blend of these two colors, combines both warmth and light in it. Light muted orange accent will give your interior cosiness and warmth, especially in the room with windows facing north. Bright orange color in the interior on the other hand is more of a claim for originality.
After the siding of your home is painted you can now start on painting the trim. There are a couple different ways you can go about painting the trim of your house. The first way is to mask off all of the trim so that you can merely spray the trim color on to your house, and the second way is to roll the trim by hand. If you are the only person painting the house I would recommend rolling the trim by hand. The reason being is because it takes a long time to mask off all of the trim on your home compared to just rolling the face of the trim boards. If you have multiple people, it would be faster to have the helpers mask everything off while you start spraying the trim color.
Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels.