Wood Walls and Trim. New interior walls and wood trim should be smoothed with sand-paper and dusted before painting or varnishing. To preserve the grain of the wood, the surface may be rubbed with linseed oil, varnished or shellacked, and waxed. If an opaque finish is desired, semi-gloss paint thinned with 1 pint of turpen-tine per gallon of paint or the primer-sealer previously described for walls may be used as a priming coat on wood. One or two coats of semi-gloss paint should then be applied over the thoroughly dry prime coat, or if a full-gloss finish is desired, the last coat should be a high-gloss enamel.
You will need any of these tools in painting your exterior: caulk, sandpaper, rags and/or paper towels, painter's tape, garden hose, power washer, or hose brush attachment, sponges & buckets for wash water, spray nozzle, stepladder, extension ladder, paint scraper, wire brush, putty knives, heat gun, rotary paint removing tool and electric drill, caulk gun, sanding block, and work gloves.
If you are grappling with the problem of choosing a woodwork colour to go with neutral walls, check out Architectural Colours by David Oliver, the founder of Paint & Paper Library. He arranged his off-whites for ceilings, cornices, walls and woodwork in chromatical groups and the concept has been so well received that chromatically arranged colours, such as soft greys, greens and pinks, have been introduced.
The salt and alum should be dis-solved in 4 gallons of hot water, after which the molasses may be added to the mixture. The resulting clear solution is then added to the lime paste, stirred vigorously, and thinned with water to the desired consistency. This whitewash has a yellow tinge when first applied, but the color disappears in a few days leaving a white film.
Masonry paints come in a wide variety of finishes, from textured to ultra-smooth. Opt for a texture if you need to disguise fine surface cracks. If you favour traditional finishes, then consider limewash, which is available from specialists such as Francesca's Lime Wash. The beauty of this paint is that it will mellow and weather with time. However, do check with the supplier first to ensure that the surface is suitable for this finish.
Step four: the key to a finished looking painting is to build it just like a house...and by that I mean layers. Paint it in the reverse order in which the eye sees it to make it three-dimensional. By this I mean paint what's farthest from the eye first, and build layer upon layer towards the eye. In other words, do the background first because it should be the farthest from the eye, then add the objects on top of that, and then add the shadows to complete the look. Ultimately it's common sense. If you paint a bowl of fruit, the bowl and fruit need to sit on top of that background, much as it would in real life.
If a desired shade is not obtainable in custom-or ready-mixed paints, white paints may be tinted with colors-in-oil. To do this, mix the color-in-oil with a small amount of turpentine or mineral spirits and stir this into the white paint, a little at a time. If a blended color is desired, more than one color may be added, such as a chrome green and chrome yellow pigments to produce a lettuce green shade.