Flat or Dead-Flat Oil - Provides a completely flat, oil-based finish. Generally used on walls but not suitable for areas of high wear. Solvent or oil-based paints are used where a tough, durable finish is required for interior and exterior timber, masonry and furniture - although, as mentioned above, the new generation of acrylics and multi-surface paints offers viable alternatives. In general, brushes need to be cleaned with turpentine or white spirit. Again, as with Warm and Cool, hair is the most important characteristic in determining Light or Deep. Women with Light coloring tend to have blond, light brown, or light red hair. Women with Deep coloring tend to have brunette, dark red, or black hair.
Gloss - These paints have a high sheen level and are usually used on woodwork. Five categories are used to describe VOC content. For guidance, a minimal VOC content is up to 0.29 per cent, whereas a very high VOC content is above 50 per cent. All brands have, where necessary, reformulated their ranges to give minimal VOC content. Mixing. Paste paints, such as aluminum, resin-emulsion, and lead-in-oil, should be stirred with a stiff paddle and reduced to painting consistency with the liquids recommended on the manufacturer's labels. If a desired shade is not obtainable in custom-or ready-mixed paints, white paints may be tinted with colors-in-oil. To do this, mix the color-in-oil with a small amount of turpentine or mineral spirits and stir this into the white paint, a little at a time. If a blended color is desired, more than one color may be added, such as a chrome green and chrome yellow pigments to produce a lettuce green shade.